General Description
A water based ceiling coating with a super flat finish for minimising reflection of light from surface imperfections. Excellent coverage and easy to use with minimal roller splatter.
Uses
A high opacity, flat finish for use on interior ceilings. Suitable for use on all interior ceilings, except those subject to steam or cooking vapours such as bathrooms, laundries or commercial kitchens.
Colours
Can be tinted to a full range of pastel colours.
Sizes
Available in 1 litre, 2 litre, 4 litre, 10 litre and 15 litre.
Coverage
Coverage of up to 16 square metres per litre depending upon surface porosity and application method.
Application
Roller, brush or airless spray.
PROVIDE ADEQUATE VENTILATION DURING USE.
Drying Times
Touch Dry Time - 20 minutes.
Recoat Dry Time - 2 hours.
Drying times refer to normal conditions (25°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary.
DO NOT USE IN TEMPERATURES BELOW 10°C OR ABOVE 30°C.
Dangerous Goods Classification
Not classified as Dangerous Goods.
Surface Preparation
Previously Painted Surfaces: Scrape off loose and flaking paint. Wash with Haymes Uni-Kleen Sugar Soap. Fill nail holes, cracks and imperfections, sand smooth and dust down. Sand gloss and semi gloss surfaces thoroughly and wipe clean. Apply one coat of Haymes Acrylic Sealer Undercoat.
New Paperfaced Plasterboard: Fill any imperfections with Haymes Unifill, sand smooth and dust down. Apply one coat of Haymes Paper Faced Plasterboard Sealer.
Fibrous or Set Plaster: Fill any imperfections with Haymes Unifill, sand smooth and dust down. Apply one coat of Haymes Sealer Binder and allow to dry for 16 hours prior to recoating.
Finishing
Apply two coats of Haymes Ceiling White.
Thinning and Clean Up
Thinning is not recommended. If thinning is necessary for spray application, thin only with approximately 100ml of water per litre. Clean equipment with water immediately after use.
Painting Conditions
Do not apply if the temperature is below 10°C. While in hot weather, avoid painting in direct sunlight. Very warm or porous surfaces may be dampened with clean water prior to the application of Haymes Ceiling White paint.
Storage
Protect from extremes of temperature. Store between 5°C and 30°C.
A water based ceiling coating with a super flat finish for minimising reflection of light from surface imperfections. Excellent coverage and easy to use with minimal roller splatter.
Uses
A high opacity, flat finish for use on interior ceilings. Suitable for use on all interior ceilings, except those subject to steam or cooking vapours such as bathrooms, laundries or commercial kitchens.
Colours
Can be tinted to a full range of pastel colours.
Sizes
Available in 1 litre, 2 litre, 4 litre, 10 litre and 15 litre.
Coverage
Coverage of up to 16 square metres per litre depending upon surface porosity and application method.
Application
Roller, brush or airless spray.
PROVIDE ADEQUATE VENTILATION DURING USE.
Drying Times
Touch Dry Time - 20 minutes.
Recoat Dry Time - 2 hours.
Drying times refer to normal conditions (25°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary.
DO NOT USE IN TEMPERATURES BELOW 10°C OR ABOVE 30°C.
Dangerous Goods Classification
Not classified as Dangerous Goods.
Surface Preparation
Previously Painted Surfaces: Scrape off loose and flaking paint. Wash with Haymes Uni-Kleen Sugar Soap. Fill nail holes, cracks and imperfections, sand smooth and dust down. Sand gloss and semi gloss surfaces thoroughly and wipe clean. Apply one coat of Haymes Acrylic Sealer Undercoat.
New Paperfaced Plasterboard: Fill any imperfections with Haymes Unifill, sand smooth and dust down. Apply one coat of Haymes Paper Faced Plasterboard Sealer.
Fibrous or Set Plaster: Fill any imperfections with Haymes Unifill, sand smooth and dust down. Apply one coat of Haymes Sealer Binder and allow to dry for 16 hours prior to recoating.
Finishing
Apply two coats of Haymes Ceiling White.
Thinning and Clean Up
Thinning is not recommended. If thinning is necessary for spray application, thin only with approximately 100ml of water per litre. Clean equipment with water immediately after use.
Painting Conditions
Do not apply if the temperature is below 10°C. While in hot weather, avoid painting in direct sunlight. Very warm or porous surfaces may be dampened with clean water prior to the application of Haymes Ceiling White paint.
Storage
Protect from extremes of temperature. Store between 5°C and 30°C.